Configure Azure AD B2C for PowerApps Portals

If you read the Microsoft documenation for PowerApps Portals (and you do read it, right?) it states that the preferred method for user authentication for the PowerApps Portals is Azure AD B2C (Business to Consumer).

The big benefits is that it takes a lot of the administration of handling passwords and authentication out of the hands of portal managers and also provides some options when building portal companion apps.

Microsoft documentation describes the steps to configure Azure AD B2C for portals and there are also a lot of great blog posts (see below) that describe and talk about the process from a Dynamics 365 for Portals perspective.

It had been a while since I went through the process. I decided today to specifically setup Azure AD B2C on the new PowerApps Portals preview and I ended up taking a lot of screenshots and notes. So this post is really just meant for me (or rather my future self) on how to setup Azure AD B2C for Portals.

Thanks to other community folks for their excellent posts on this topic, which helped me put my own notes together:

Andre Margano

Colin Vermander

Debajit Dutta

Setup Azure AD B2C

You will require an Azure subscription. You can setup a free account and Azure AD B2C should not cost you anything if you have a reasonable number of logins.

Sign into the Azure Portal on which there is a subscription attached.

Azure Portal with Subscription

Click to Create a resource (upper left corner) and search for “Azure AD B2C”

Azure Marketplace – search for Azure AD B2C

Click “Create” to create the Azure AD B2C resource.

Create Azure AD B2C

There will be two options, one to create a new Azure AD B2C Tenant and another to link the tenant to your Azure subscription. The first step is to create the tenant.

Create Azure AD B2C Tenant

Create an organization name and a domain name. I followed a pattern of <<orgname>> and <<orgname>>tenant, but ideally put in something descriptive.

Ideally, place the Azure AD B2C resource in the same geography as your PowerApps Portal and CDS environments to reduce any potential latency issues.

Create Org and Tenant names

After these items are setup, the Azure AD B2C tenant needs to be linked to the Azure Subscription. Click on the “Link an existing Azure AD B2C Tenant”

Link new Tenant to Subscription

The Azure AD B2C Tenant should appear in the drop down list, as well as the available subscriptions. Choose to create a new resource group, and again, choose the same region as your Portal/CDS environments.

Linking Tenant to Subscription

Setup Azure AD B2C Application

The next step will be to setup the Azure AD B2C Application for our portal. The first thing is to change the directory to ensure that you are logged into the Azure AD B2C tenant that you created earlier. Click on the upper right corner on your account to switch directories.

Switch to Azure AD B2C Tenant

On the left panel, choose “All Services” and then search for “Azure AD B2C”. Select it from the list of services that appear.

Choose Azure AD B2C

The Azure AD B2C service page will appear with the various options.

Azure AD B2C Service page

Click on “Applications” in the Manage section and then choose “Add” to add the new application.

Add Azure AD B2C Application

When setting up the application, you can pick any name but ideally it should be something descriptive. Make sure that web api and allow implicit flow are turned to “yes”. The reply URL will be your portal URL, appended with a signin-<<unique federation name>>. For my purposes, the <<unique federation name>> is “B2C” and we will need to be consistent with this in other areas of the configuration (more below).

Setting Up Application

Click Create and then the application should be setup.

Azure AD B2C application

Setup Policies

The next step is to create user flows (policies). These are configurable options that will drive the user sign-up and sign-on experiences while accessing the portal as well as how the password reset will work.

On the left panel, choose “User flows (policies)” from the Policies section and in the main window click on “New user flow”

Creating User flows

We will first use the “Sign up and sign in” type. We need to define how a potential portal user will actually sign up and also sign in to the portal.

Sign up and sign in user flow

Give the policy a descriptive name. For identity providers, at this point the only option will be email signup (there are a lot of other blog posts if you want to use other identity providers). For now we will also not worry about multifactor authentication.

Setup sing up and sign in user flow

Scrolling down, under the 4. User Attributes and Claims section, choose at very least email address, but ideally pick Given name and Surname as well. Typically we will manage most of the user information on our portal itself that will be linked to the contact record in CDS. Click Create.

Attributes and Claims

We should now have our signup and signin user flow created.

Sign up and Sign In user flow

Click on Properties on the left pane, and in the main window, scroll down to the Token compatibility settings and changes the Issuer (iss) claim to option with “tfp” in the URL;

Change Issuer (iss)
Change to option with “tfp”

We will need to setup another user flow to configure the password reset options. This is critical if you don’t want to have spend time providing users with new passwords to the portal. This will provide a secure, self-service method for your portal users to manage passwords on their own.

Setup Password reset user flow

Provide a descriptive name and also choose the option to reset a password using an email address.

Password user flow

In the claims section, choose Given Name and Surname, mainly for consistency with the signon process.

application claims

There should be two user flows listed under the application.

User flows (policies)

Keep the Azure portal open for the next steps because we will need to refer back here to grab specific settings for the portal configuration.

Settings Required for Portal Configuration

Before we can configure the portal, we need to capture some of the information.

Application Name and Application ID

We need to note a series of setting such as the Azure AD B2C application name and application id, as well as issuer URLs. The name is what we defined earlier and the application id will be a generated GUID. These can be found under the applications list.

These values will be used to update the following Portal Site Settings (see section futher down on how to update site settings)

  • Authentication/OpenIdConnect/[Federation-Name]/ClientId
  • Authentication/OpenIdConnect/[Federation-Name]/DefaultPolicyId
  • Authentication/OpenIdConnect/[Federation-Name]/Authority
  • Authentication/OpenIdConnect/[Federation-Name/PasswordResetPolicyId
  • Authentication/OpenIdConnect/[Federation-Name]/ValidIssuers
Application Name and ID

We also need the policy sign-in URL. This can be located by opening the signup and sign in user flow we created earlier and by selecting “Run user flow” to generate the URL with JSON data.

Get policy sign-in URL
Retrieve Issuer URL

You will also need to the password reset user flow policy name.

Password reset user policy

Also you will need a list of valid issuers. You will have already captured the policy sign in URL earlier. We will also need the Password reset issuer. This is found by opening the policy and choosing properties and running the user flow and clicking on the generated user flow link.

Retrieveing Password Issuer
Issuer URL

Configure Portal

Now that our Azure AD B2C has been configured, the next step is configure our PowerApps Portal to be able to interact with Azure AD B2C.

Navigate to and choose the Portal Management App from the list of apps. We will be configuring the Azure AD B2C integration by creating and updating Portal site settings.

Portal Management

The Portal Management app is a model-driven app that allows configuration updates to the PowerApps Portal (as all portal metadata is stored in CDS). Navigate to Site Settings.

Site Settings

You will need to decide on an unique “Federation Name” for your portal configuration. I simply choose “B2C” and we will use this value in the following configurations.

Create a new site setting and put the following value;


Enter in the policy sign-in URL you captured above from the Azure portal.

Site Setting

Save the site setting record and add another;


Enter in the application id GUID you captured above from the Azure portal.

Client ID Site Setting

Save this site setting and add another;


This time enter in the portal URL, followed by “signin-B2C” (signin- <<federation name>>)

Redirect URI

There are a couple more settings to round out this part of the configuration. To support a federated sign-out, add the following Site Setting;


Set the value to “true

Federated Sign Out

To make Azure AD B2C the *only* indentity provider, add the following:


And again enter in the Policy sign in URL from above;

Default login button

At this point you will have entered in enough settings for a user to be able to sign on and sign in to the PowerApps Portal using Azure AD B2C, however, we will want to enable the password reset mechanism as well.

Create another new Site Setting,


Enter in the password reset policy ID that you captured above.

Password Reset Policy ID

Tired of creating Site Settings yet? Only a few more…

Create a site setting for the valid issuers;


For the values, enter in the issuer URLs seperated by comma’s;

Finally enter a value for the default policy id.


Default Policy ID

Note there are other Site Setting values that can be configured for the PowerApps Portal. Verify your settings (I found that I missed the “Federation Name” a few times during my setup.)

PowerApps Portal Authentication

If everything was setup properly, you should be able to login to the PowerApps Portal using Azure AD B2C.

PowerApps Portal
Azure AD B2C Sign In and Sign Up page

The Azure AD B2C will provide your users the ability to sign up securely as well as be able to reset their password.

You can rebrand the default Azure AD B2C page, instructions are on Microsoft Docs site. I may need to make notes someday so I could potentially create a blog post.


Setting up Azure AD B2C is not hard, but it can be a bit tedious. Hopefully these step by step instructions will be clear and allow you to configure this properly (again, speaking to my future self).

Cover Photo by CMDR Shane on Unsplash

Nick Doelman is a Microsoft Business Applications MVP and has many times stumbled on blog posts and community posts from his past self that has helped his current self. Nick also tends to post stuff on twitter so he can also find that in his timeline later at @readyxrm

3 thoughts on “Configure Azure AD B2C for PowerApps Portals

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s